The Spinjet Vessel Rinser from Rhino Coffee Gear is a 600mm long, in-bench vessel rinser. Featuring a large sink and the spinjet valve, this rinser has been designed specifically for busy hospitality environments.
Effective Mechanical Cleaning - The Spinjet Valve spins and sprays in a fast, sweeping action, easily removing stubborn milk residue and coffee grinds from your vessel.
Superior Drainage - The large drain outlet and an improved drain tray design reduces static build-up of liquid, while the low profile body is optimally sloped and angled to ensure effective removal of liquids.
Multiple Vessel Options - The large actuator plate can be used across a broad range of vessels, including small milk jugs and larger vessels such as plungers and milkshake cups.
Install Parts - Included with each rinser you will find some fittings and hoses to make installation easier (3/8 push fit inlet plus elbow option, 1 metre of inlet hose and outlet drain hose). It is recommended a Pressure limiting valve (PLV) is used when installing on mains water line.
NSF Certified All Rhino Milk Pitcher Rinsers are NSF Certified.
Dimensions (approx): Width - 238mm x Length - 600mm
Drain Hose Size: 25mm/1 inch
Please Note: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical pitcher rinser on hand prior to cutting into bench top surfaces. Bombora does not take responsibility for installation cut out error and provides the sizes and dimensions as a layout guide only.
Please Note: It is recommended that a Pressure Limiting Valve (PLV) is used when installing on mains water line. Click here to view.
Click here for Specification Sheet
Click here for Installation instructions
Click here for Installation template.
Click here for Cleaning instructions.
Click here to view the Spinjet parts diagram.
Watch how to connect the drain tray and hoses.
Watch how to fix the o-ring to the activation piston.
Watch how to replace the piston seals