Electrolux / Frigidaire Fridge Filter

Electrolux / Frigidaire Fridge Filter


Home users, click here to shop online for Electrolux filters.

The EPTWFU01 Frigidaire PureSource Ultra II replacement filter fits certain Frigidaire and Electrolux models released mid-2015. This filters Reduces Chlorine, taste & Odour, Particulate Class 1, Cysts & Bisphenol A (BPA), lead, mercury. Certified to meet NSF/ANSI Standards 42, 53, and 401.

Installation Instructions:

1. Remove the current filter and discard.

2. Slide the new filter in with the grip oriented horizontally.

3. Push the filter and turn 90 degrees to the right until it snaps into place. The grip should now be oriented vertically.

4. Run water through the dispenser for approximately 3 minutes (1.5gallons) to prime the filter before use and discard this water.

Filter Specifications:

Capacity: 757 litres (200gallons) without indicator / 473 litres (125 gallons) with indicator

Min / Max operating Temp: 0.6 - 38 degrees (33F-100F)

Min / max working pressure: 206.8 - 689.5kPa (30-100 psi)

Flow Rate: 2.46L/min (0.5GPM)

For further information on change over refer to the owner's manual that accompanied the fridge.

Fridge manufacturers recommend changing your filter every 6 months or when the light indicator comes on (typically lasts up to 6 months), this can be dependent on water quality and pipe works in certain areas

PLEASE NOTE: If you think your fridge takes this filter but are uncertain, please email us so we can confirm this for you.

Other known model numbers: 8017946705 / ULX22

Water Articles: Click Here to learn more about water and filtration

Electrolux / Frigidaire Fridge Filter
Item Code EPTWFU01
Cubic Weight 0.33 kg