Rhino 600mm Rinser with Blender Attach. and Spinjet Assembly

Rhino 600mm Rinser with Blender Attach. and Spinjet Assembly


The RHPR600-2BL is one of Rhino Coffee Gear's latest releases. This rinser kit features the standard Rhino 600mm Vessel Rinser (which includes the 3-piece drain tray and 2 spray mechanism positions) with an additional Blender Attachment for larger vessels and popular blender jugs such as Vitamix and Blendtec. Also included in this kit is an additional Single Drain Tray which fits the Actuator Plate of the Spinjet Spray Assembly.

The RHPR600-2BL also features the Rhino Spinjet Valve, which spins and sprays in a fast, sweeping action, easily removing stubborn waste from your vessel. Its low profile body is optimally sloped and angled to ensure effective removal of liquids, reducing common odours caused from static waste. The large actuator plate supports blender jugs and larger vessels such as plungers and milkshake cups.

This rinser kit contains: 
1 x Rhino 600mm Rinser
1 x Rhino Spinjet Spray Assembly
1 x Rhino Rinser Blender Attachment (RHBRM) 
1 x Rhino Rinser Single Plate with actuator hole (RHPRSPA)
1 x Equal Tee Kit (1 x PI0212S Equal Tee / 1m poly 3/8 Hose / 1 x CI321214S Tap Adapter)

- 3 piece drain tray + additional drain tray (with actuator hole)
- 2 spray mechanism positions
- Standard & Rhino Spinjet Valve
- Low profile body
- Large actuator plate
- Easy to clean
- NSF Certified


- Dimensions: 238mm (W) x 600mm (L) 185mm (D) approx. (Height inclusive of Riser)
- Materials: 304 Stainless Steel

Drain Hose Size: 25mm/1 inch

Depth Requirements: 
The Rhino rinsers are 40mm deep, however, this is without fittings. We recommend at least 150mm of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.

http://www.clean-machine.com.au/images/2BL Assembly 600px.jpg

Please Note: It is recommended that a Pressure Limiting Valve (PLV - also known as a Pressure Restricting Valve or Water Pressure Regulator) is used when installing on mains water line. Click here to view.

Give Your Sink a Lift

Don't want to cut into your bench? The Rhino Coffee Gear Vessel Rinser Bench Station has been designed to provide another installation option for cafes, restaurants, bars and other venues. Perfect for spaces which don't allow for in-bench vessel rinser installations, the Rhino Bench Station lifts the vessel rinser up off the bench in its own stainless steel casing. Bench Station and Rinsers sold separately. Check it out here.

http://www.clean-machine.com.au/images/RHPRRIS300_1_300px.jpg http://www.clean-machine.com.au/images/RHPRRIS600_2_300px.jpg

Do not cut out bench top surfaces prior to receiving your rinser: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical vessel rinser on-hand prior to cutting into bench top surfaces. Bombora Supplies does not take responsibility for errors concerning installation and provides the sizes and dimensions as a layout guide only. 

http://www.clean-machine.com.au/images/RHPR600-2BL_1_300px.jpg http://www.clean-machine.com.au/images/RHPR600-2BL_2_300px.jpg

Click here for Installation Instructions.

Click here for Installation template.

Click here for Cleaning Instructions.

Click here to view the Spinjet parts diagram

Click here for the Rhino Rinser Blender Kits Spec Sheet