Rhino Pitcher Rinser 600mm

Rhino Pitcher Rinser 600mm


Rhino Coffee Gear's new pitcher rinser design brings with it a number of features you have been asking for!

Better Drainage the 3 piece drain tray has an improved design to ensure there is no static build-up of residue along with a generous drain outlet.

Bigger Vessels the large actuator plate makes it useful across a broader range of equipment.

Optional Spinjet Spray Mechanism, the new spinjet valve sprays and spins at the same time creating a more robust mechanical cleaning action than normal rinsing valves. It is ideal for plungers using tea & coffee grounds, milk and other residues that tend to hold firm.

Install Parts included with each rinser you will find some fittings and hoses to make installation easier ( 3/8 push fit inlet plus elbow option, 1 metre of inlet hose and drain hose with clip). It is recommended a Pressure limiting valve (PLV - also known as a Pressure Restricting Valve or Water Pressure Regulator) is used when installing on mains water line.

NSF Certified All Rhino Milk Pitcher Rinsers are NSF Certified.

Please Note: It is recommended that a Pressure Limiting Valve (PLV) is used when installing on mains water line. Click here to view.

Dimensions (approx): Width - 238mm x Length - 600mm

Drain Hose Size: 25mm/1 inch

Depth Requirements: 
The Rhino rinsers are 40mm deep, however, this is without fittings. We recommend at least 150mm of clearance under the bench for basic connection (this includes fall for the drain hose). The actual depth may differ depending on the location of the drain, the location of the water supply, or whether you use an elbow or a straight connector.
RHPR600 Top Diagram

Please note: Due to slight variations in manufacturing design and the varying requirements of bench materials, it is strongly recommended to have the physical pitcher rinser on hand prior to cutting into bench top surfaces. Bombora does not take responsibility for installation cut out error and provides the sizes and dimensions as a layout guide only.

http://clean-machine.com.au/images/600 rinser double.jpg

Want to fit 2 spray mechanisms? Just ask us how!

Give Your Sink a Lift

Don't want to cut into your bench? The Rhino Coffee Gear Vessel Rinser Bench Station has been designed to provide another installation option for cafes, restaurants, bars and other venues. Perfect for spaces which don't allow for in-bench vessel rinser installations, the Rhino Bench Station lifts the vessel rinser up off the bench in its own stainless steel casing. Bench Station and Rinsers sold separately. Check it out here.

http://www.clean-machine.com.au/images/RHPRRIS300_1_300px.jpg http://www.clean-machine.com.au/images/RHPRRIS600_2_300px.jpg

Click here for Installation instructions

Click here for Installation template

Click here for Cleaning instructions

Click here for the Rhino Pitcher Rinser Spec Sheet

Watch how to swap the plug and spray mechanisms.

Watch how to connect the drain tray and hoses.

Watch how to fix the o-ring to the activation piston.

Watch how to change the piston.

Watch how to replace the piston seals

Rhino Pitcher Rinser 600mm
Item Code RHPR600
Cubic Weight 4.16 kg